When you turn on the tap and find that there is no water in house suddenly, it may be a significant hassle. The question is, what leads to this? How, more significantly, do you resolve the issue? In this article, we’ll go through some of the things we found while investigating the potential causes of a non-functioning faucet.
Faucets for the kitchen and bathroom of today are more high-tech than ever. However, troubleshooting these components might be more challenging for the ordinary homeowner. Read on to discover the most common causes of a non-functioning faucet and how to fix them quickly and effectively.
The Most Probable Causes of Your Faucet Not Working
1. Problems with Waterlines
The problem may be in the water line rather than the faucet itself. If you suspect this is the case, you should verify the functionality of the other faucets in the home.
Inquiring with nearby residents about their access to potable water is likewise a prudent move. The problem may lie with the water main or the water provider if there is no water in house suddenly. If that’s the case, contact your water company and see if they can help you figure out what’s wrong.
2. Washer Dislodges from Tap
No water coming out of bathroom faucet might result from a tap washer that has been displaced or broken. When this occurs, no hot water from taps may dribble intermittently until it stops. To see whether this is the case, you should test every faucet in the home. If there’s only one tap, you may check it out and replace the washer if it’s worn out.
3. Malfunctioning Water Control Valves
The water valves in your house regulate water flow to each fixture if there is no water in house suddenly. Faucets and tubs will cease to function if the valves are closed or malfunction. You may test whether this is the case by ensuring the valve is fully open and working. If it isn’t, you should call a plumber for advice. You could also ask your landlord or super, if you reside in an apartment complex, about the location of your valve.
4. Water Experiencing Leaks
water not coming out of faucet is another symptom of a leak somewhere in your plumbing system. Loss of water pressure due to leaks may lead to significant problems if not remedied quickly. Locate potential water leaks by tracing the path of your home’s water pipes.
The area under the sink should be inspected for puddles, water stains, and other telltale symptoms of a leaking pipe or faucet. Pipes dented may leak water because of a leak somewhere else. Therefore, you need to call a plumber to fix or replace the affected pipes.
5. Pipes Freeze Over
Water supply issues might arise if pipes freeze and break, preventing water from entering the house. This may be a localized problem, or it may impair your whole home’s supply of water if no hot water coming out of faucet.
If you reside in a location that has recently seen sub-zero temperatures, and your house has been unoccupied for a few days, this might be why your water has stopped working. If your plumbing pipes have frozen, you may unfreeze them using a heat gun or hair dryer. However, proceed with care since pipe bursts may result in significant water damage to your property.
6. The Rusty Water Pipes
Rust buildup in old or improperly installed pipes might lead to rust clumps forming around the faucet. You may not be able to get your faucet to function if you see rust or orange water around it. Over time, wear and strain on the faucet may develop rust, which can clog the waterline by settling debris. You should call a professional plumber for help if that’s the case.
7. Deteriorated Pipes and Hardware
Pipes supplying water to homes older than 150 years old are more likely to need to be updated or undersized. Consequently, water pressure may decrease, and blockages may form. Make sure that all of your home’s water faucets are functioning properly. When they aren’t, or you hear noises whenever you attempt to switch on the tap, this might be the problem.
8. Slow Drainage
If a water pipe is blocked, either no water coming out of faucet will come out of the faucet or just a trickle would. If you’ve discovered that none of your alternative water sources are functioning, it’s possible that silt buildup or other blockages in the pipes leading to your water line are to blame. Pipes may get obstructed due to several factors, including heavy metals and lime accumulation.
9. Water Supply Systems With Air Valves
An airlock bubble in the plumbing system might be difficult to disperse. When this happens, water won’t be able to move freely through your pipes, and if you don’t fix it, it might lead to worse problems in the future. To get rid of the airlock, you may either wash out your water line yourself or hire a plumber.
Is There a Method for De-Silting Water Pipes?
Cleaning out the waterline is the most straightforward and effective way to remove silt from plumbing. To begin clearing up your pipes, you should run cold water through every fixture in your house. Run the faucets at full blast for about twenty to thirty minutes. More transparent water may be seen when more time is spent in the water. If not, try again with the same steps.
Plumbers suggest washing out water lines every 18 to 22 months to avoid sediment buildup and possible obstructions.
Why Is Only One of My Faucets Leaking?
When water pressure is weak from only one sink, it’s usually due to a faulty aerator. Lime or onerous water may cause sediment to build up in aerators, making them ineffective. You may test to see whether this is the problem by turning on every faucet in your house and letting the water flow cold and hot simultaneously and this is same for if hot water not working but cold is not.
If just one sink is affected, the problem is often the aerator or, in rare situations, the faucet cartridge this is same for when no water in kitchen but everywhere else. The aerator may be removed from the faucet with a twist, cleaned, and reattached if it becomes blocked. However, if the cartridge becomes stopped or malfunctions, the faucet must be disassembled before it can be fixed or replaced.
What to Do if No Water Comes Out of Tap?
If no water coming out of tap when turned on, you will need to reset it at some time. Performing a reset on a water pump is similar across manufacturers, although there may be some subtle differences.
1. Switch Off the Lights
To begin, disconnect the electricity from the water tank. This is often situated in the electrical panel’s breaker box. If your light switches need to be clearly labeled, the one that controls the pump is likely the main one or the one serving the basement.
2. Take Off the Wrapper
To remove the water pump cover, rotate it 90 degrees to the left and pull it up from the edge using a screwdriver. Taking the top off a water pump may need loosening a nut holding it in place.
3. Wash the Exterior
Dead insects, leaves, and other debris may clog up the pump’s contacts, so use a clean towel or old toothbrushes to get them out. Be careful to clean the outside corners where dust and filth collect. Last but not least, check the pressure sensor to make sure it’s working.
4. Bring Back the Energy
Cleaning the pump’s contacts and the lid will allow you to reinstall the cap and nut. Turning the breaker back on will enable the water to pump once again function.
5. Pull the Lever
The next step is to depress the pump lever and maintain it at a 25-degree position. Then, double-check for success by doing the process again. Some pump levers won’t make a noise when they reach the bottom, but they will still stop.
To build up water pressure within the pump, you must keep the lever down for roughly a minute and a half to two minutes. The pump will return after a reset, when you may release the lever.
Is It Possible For an Airlock to Self-Clean?
The size of the airlock is a determining factor. Once and a while, a little airlock may empty itself. Persistent airlocks, however, will have to be removed by hand. To eliminate it rapidly, hook up a water line to the airlock’s corresponding water faucet. One end of the hose should be screwed into the tap, and the other should be attached to a functional tap.
When turning on the water, there shouldn’t be any air gaps between the hose and the faucets. To build up pressure in the hose, you need next open the faucet that isn’t connected to the airlock all the way.
The airlock should be broken by force after a few minutes, and the water should start flowing freely again. Anywhere from 2-10 minutes of running water will do the trick in releasing the pressure. After waiting 15–20 minutes, a plumber may need to be called in if the airlock has not been removed.
FAQs on No Water in House Suddenly
Why would my Water Stop Working?
There’s no need to freak out if your water supply suddenly stops working. The water could have stopped flowing due to a blocked valve, a broken water heater, a leaking pipe, or a problem with the water supply.
Why do I suddenly have No Water?
The main water line may be broken if you are experiencing water shortages at home. Also, a case emergency shut-off valve may have mistakenly activated and halted your water flow or leaked and blocked your water supply.
Why would only one Faucet Not Work?
If the issue is confined to a single faucet, it may be as simple as a blocked aerator. Whether the faucet suddenly turns off, check to see if the stopcock is open; this is a common cause.
How do you Unclog a Water Pipe?
If you have a blocked drain line, you may unclog it using a mixture of baking soda, vinegar, and hot water. After letting the combination soak in the drain for 10 to 15 minutes, pour additional hot water, followed by baking soda, vinegar, and finally, more hot water.
What do you do when you have No Water Supply?
- Look in a different drain.
- Find Indications of a Major Break.
- The water supply should be examined.
- Pipes might have frozen, so be sure you check them.
- Be Sure to Ask Around the Block.
- Verify with the service provider in your area.
- Please contact a plumber immediately.
Why did my Faucet Suddenly Lose Water Pressure?
A blocked aerator or cartridge is usually to blame for a kitchen faucet no water. The aerator is located on the end of the faucet spout and is the last point of contact for the water before it reaches the sink.
Can Water Pipes Get Air Locked?
When particles of air are caught by the moving water and prevent the pipe from draining properly, this is known as an airlock.
No Water in House Suddenly: Conclusion
There are several potential causes for a non-functioning faucet. First, you should troubleshoot to determine whether the problem of no water in house suddenly is localized to a single faucet or no water to house.
Read Also: